PrintMetric

Printer type Selecting a printer will auto-fill the average power.

Average power (W) — estimated Preset is a typical estimate. For best accuracy, enter your printer's measured average power.

Upload G-code Uses slicer-reported weight when available; otherwise estimates from length, diameter, and material density.

Filament used (g)

Advanced

Filament diameter (mm)

Filament density (g/cm³)

Quote details

Customer name

Part / job name

Notes

Customer name, job name and notes are stored only in this browser for your next visit.

Profiles

Reset deletes all PrintMetric settings and saved profiles from this browser after confirmation.

Filament Price (€/kg)

Material Preset density is approximate. Use your filament manufacturer's value for best accuracy.

Print time (hours)

Electricity Price (€/kWh)

Machine Wear per Unit (€) Flat EUR amount for one printed unit; multiplied by quantity.

Setup labor time (minutes) Work performed once for the complete order.

Labor time per unit (minutes) Repeated work such as support removal, cleanup or finishing.

Labor Rate (€/hour) Estimate your hourly rate (e.g., 8–15 per hour).

Markup (%) Markup is the percentage added to calculated cost. Default is 20%.

Waste / Failure Allowance (%) Adds a percentage buffer for failed prints, waste and other material/process losses.

Quantity Positive whole numbers only.

Minimum Order Price (€) Sets a floor for the complete order after quantity is applied.

USD per EUR (manual rate) USD is shown using this manual rate. It is not updated automatically.

Calculates the EUR base price with markup. Exports a customer quote PDF.

Base currency — EUR (€)

—

Converted — USD ($)

—

Show EUR cost breakdown

Filament (order)—

Energy used (order)—

Electricity (order)—

Setup labor (once)—

Per-unit labor (order)—

Total labor—

Machine wear (order)—

Production subtotal (order)—

Waste / failure allowance—

Adjusted cost—

Markup amount—

Effective price per unit—

Quantity—

Final order total—